Issue 4, 1999

Classification of particles from the farm environment by automated sizing, counting and chemical characterisation with scanning electron microscopy-energy dispersive spectroscopy

Abstract

About 60 000 particles in 288 aerosol samples collected during farm work have been characterised with automated particle analysis using scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDS). Based on EDS-analysis of materials with known composition (potato flour, α-quartz, K-feldspar and β-wollastonite), criteria were developed for classification of particles as: (1) organic, (2) silicon-rich (silica), and (3) other inorganic particles. The reproducibility of the relative mass proportions in dust samples collected during farm work was 0.078 when approximately 200 particles were characterised per sample. Field samples from the farm environment showed clear differences in composition. Generally, inorganic particles dominated the particle mass. The proportion of the organic particle mass was highest for tending of swine and poultry, 55 and 38% respectively. Silica particles amounted to 10 to 20% of the total mass during handling crops, e.g. grain, straw, hay, potatoes, and onions. It seems likely that the results can be used in etiologic studies, but further validation would be needed for quantitative purposes.

Article information

Article type
Paper

J. Environ. Monit., 1999,1, 379-382

Classification of particles from the farm environment by automated sizing, counting and chemical characterisation with scanning electron microscopy-energy dispersive spectroscopy

A. Skogstad, L. Madsø and W. Eduard, J. Environ. Monit., 1999, 1, 379 DOI: 10.1039/A902941I

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements