PT - JOURNAL ARTICLE AU - Ho, Kevin AU - Tenkate, Thomas TI - P-372 Safety data sheets as a hazard communication tool: an assessment of suitability and readability AID - 10.1136/OEM-2021-EPI.294 DP - 2021 Nov 01 TA - Occupational and Environmental Medicine PG - A108--A108 VI - 78 IP - Suppl 1 4099 - http://oem.bmj.com/content/78/Suppl_1/A108.2.short 4100 - http://oem.bmj.com/content/78/Suppl_1/A108.2.full SO - Occup Environ Med2021 Nov 01; 78 AB - Introduction Safety data sheets (SDSs) are printed materials designed to communicate the hazards associated with using chemicals/hazardous products in the workplace. SDSs are highly technical in nature, often containing dense, ambiguous text, which places considerable comprehension demands on workers, especially those with lower literacy skills.Objective To assess the suitability and readability of SDSs as a hazard communication tool for workers.Methods A random sample of 50 SDSs compliant with WHMIS 2015 were extracted from the CCOHS m(SDS) database. The Suitability of Materials (SAM) tool, originally designed to evaluate patient education materials, was used to assess SDSs for content, literacy demand, use of graphics, and layout/typography. To account for legislated content requirements under WHMIS 2015, an amended SAM tool was also developed for scoring. Readability software was used to determine the reading grade level required to understand SDSs based on several common formulas/indices.Results When the original SAM tool was used, the mean total SAM score was ‘not suitable’ (30.22%). When the amended SAM tool was used, the mean total SAM score increased to ‘adequate’ (64.43%). The mean readability scores were as follows: Flesch-Kincaid Grade Level (10.2), Gunning-Fox Index (8.5), Coleman-Liau Index (12.2), and Simple Measure of Gobbledygook index (10.2).Conclusion Even though the amended SAM tool was better able to identify content-related issues specific to SDSs, the use of SDSs as a hazard communication tool needs improvement. The SDSs analyzed required a reading grade level between the 8th and 12th grades. These levels exceed the 6th-grade reading level recommended to ensure that 75% of adult Americans can read the material without difficulty. Overall, chemical/hazardous product manufacturers should use readability assessments together with the amended SAM tool when writing SDSs to ensure that the written information is easily understandable for all audiences.