Article Text

other Versions

PDF
Original article
Personal exposure to ultrafine particles from PVC welding and concrete work during tunnel rehabilitation
  1. Rikke Bramming Jørgensen1,
  2. Morten Buhagen2,3,
  3. Solveig Føreland2,4
  1. 1Department of Industrial Economics and Technology Management, Norwegian University of Science and Technology, Trondheim, Norway
  2. 2Department of Occupational Medicine, St. Olav's Hospital, Trondheim University Hospital, Trondheim, Norway
  3. 3Department of Public Health and General Practice, Norwegian University of Science and Technology, Trondheim, Norway
  4. 4Department of Geology and Mineral Resources Engineering, Norwegian University of Science and Technology, Trondheim, Norway
  1. Correspondence to Dr Rikke Bramming Jørgensen, Department of Industrial Economics and Technology Management, Norwegian University of Science and Technology, Trondheim N-7491, Norway; rikke.jorgensen{at}iot.ntnu.no

Abstract

Objectives To investigate the exposure to number concentration of ultrafine particles and the size distribution in the breathing zone of workers during rehabilitation of a subsea tunnel.

Methods Personal exposure was measured using a TSI 3091 Fast Mobility Particle Sizer (FMPS), measuring the number concentration of submicrometre particles (including ultrafine particles) and the particle size distribution in the size range 5.6–560 nm. The measurements were performed in the breathing zone of the operators by the use of a conductive silicone tubing. Working tasks studied were operation of the slipforming machine, operations related to finishing the verge, and welding the PVC membrane. In addition, background levels were measured.

Results Arithmetic mean values of ultrafine particles were in the range 6.26×105–3.34×106. Vertical PVC welding gave the highest exposure. Horizontal welding was the work task with the highest maximum peak exposure, 8.1×107 particles/cm3. Background concentrations of 4.0×104–3.1×105 were found in the tunnel. The mobility diameter at peak particle concentration varied between 10.8 nm during horizontal PVC welding and during breaks and 60.4 nm while finishing the verge.

Conclusions PVC welding in a vertical position resulted in very high exposure of the worker to ultrafine particles compared to other types of work tasks. In evaluations of worker exposure to ultrafine particles, it seems important to distinguish between personal samples taken in the breathing zone of the worker and more stationary work area measurements. There is a need for a portable particle-sizing instrument for measurements of ultrafine particles in working environments.

  • ultrafine particles
  • FMPS
  • particle size distribution
  • personal exposure
  • PVC welding

Statistics from Altmetric.com

Request permissions

If you wish to reuse any or all of this article please use the link below which will take you to the Copyright Clearance Center’s RightsLink service. You will be able to get a quick price and instant permission to reuse the content in many different ways.